SAGA / SF-TLBF AUTOMATIC SAGA LOOP FEEDING MACHINE

SF-TLBF AUTOMATIC SAGA LOOP FEEDING MACHINE

Product information

Product overview

The SF-TLBF AUTOMATIC SAGA LOOP FEEDING MACHINE automates the threading of loop fasteners through tags. It combines automatic loop separation, feeding, tag threading and finished-product collection to reduce manual handling steps.

A touch screen allows operating parameters to be adjusted, while real-time closed-loop machine vision inspection helps monitor processing quality and operating status. Compatible loop lengths are 5 inches and 7 inches, making the machine an option for automating tag-loop preparation and finished-product handling.

The machine uses only PP TLBF loops in 5-inch and 7-inch lengths and can switch between 1-3 card feed heads. Each cycle organizes the bundled loops, separates one loop and transfers it to the threading position. The selected heads then feed cards sequentially, and the threaded loop is transferred to the collection tray. The 1-head, 2-head and 3-head modes feed 1, 2 and 3 cards respectively.

Each SF-TLBF cycle separates one TLBF loop, threads it through 1-3 tags in the selected order and transfers the complete set to the collection tray. This process prepares tag-loop assemblies for subsequent use. Check the card count, sequence and hole edges on each trial set.

Product features

  • Integrated separation, feeding, threading and collection reduce manual transfers between steps.
  • Touch-screen interface for parameter setup and adjustment.
  • Real-time closed-loop machine vision inspection supports processing quality monitoring.
  • Uses only PP TLBF loops in 5-inch and 7-inch lengths.
  • The same machine switches between 1-3 card feed heads, feeding 1, 2 or 3 cards per cycle respectively.

Product specifications

Item No.
SF-TLBF AUTOMATIC SAGA LOOP FEEDING MACHINE
Voltage
AC 100-240 V
Frequency
50/60 Hz
Maximum Power Consumption
<=200 W
Air Supply
External compressed air required
Working Air Pressure
0.6 MPa
Card Dimensions
Width 20-78 mm; height 30-105 mm
Card Hole Diameter
>2.5 mm
Net Weight
80 kg
Machine Dimensions
110 x 70 x 90 cm (L x W x H)
Compatible Consumables
TLBF loops only
Consumable Material
PP
Loop Lengths
5 inches, 7 inches
Card Feed Head Modes
Switchable 1-head, 2-head and 3-head modes
Cards Fed per Cycle
1 head: 1 card; 2 heads: 2 cards; 3 heads: 3 cards
Cycle Rate
1 head: 17 cycles/min; 2 heads: 14 cycles/min; 3 heads: 11 cycles/min
Operator Interface
Touch screen
Inspection
Real-time closed-loop machine vision inspection
Process
Loop separation, automatic feeding, tag threading and finished-product collection

Application and Trial Procedure

  1. Measure card width, height and hole diameter, and check each hole position. Load cards into the feed heads in tag order, then load 5-inch or 7-inch PP TLBF loops.
  2. Select 1, 2 or 3 card feed heads on the touch screen and run one trial cycle with the actual cards and loops.
  3. Check the vision inspection result and collection tray. Inspect one set to confirm that a single loop passes through every intended tag, with the correct count and order and no torn holes.

Selection and use

Use actual tag and loop samples to confirm card dimensions, hole position and consumable compatibility. The listed 5-inch and 7-inch lengths are two supported sizes, not a continuous range. Each cycle feeds 1, 2 or 3 cards according to the selected mode. Multiple heads feed cards sequentially; card count is not the number of separate finished loop assemblies. Follow the machine manual for operation and maintenance.

Use SF-TLBF for tag-loop preparation and collection. For attaching a tag around a product handle or loop, assess the SF-101 with the actual attachment point. Before clearing a jam, stop the machine, disconnect power and air and release residual pressure. Keep hands clear of feed heads and moving clamps.

Frequently asked questions

Which operations does the SF-TLBF perform?

It combines automatic loop separation, feeding, tag threading and finished-product collection for automated tag-loop preparation.

Which loop lengths does the SF-TLBF support?

It supports only PP TLBF loops in 5-inch and 7-inch lengths. Provide actual loop and card samples to confirm the configuration before ordering.

What is the cycle rate of the SF-TLBF?

The listed rates are 17 cycles/min for 1 head, 14 cycles/min for 2 heads and 11 cycles/min for 3 heads. The same machine switches between the three modes and feeds 1, 2 or 3 cards per cycle respectively. After one loop is separated, the selected heads feed cards sequentially; each head does not produce a separate loop assembly. Actual output depends on operating conditions.

What power supply and installation space are required?

The supply is AC 100-240 V, 50/60 Hz, with maximum power consumption of <=200 W. Machine dimensions are 110 x 70 x 90 cm (L x W x H), and net weight is 80 kg. Allow additional space for operation and maintenance. External compressed air at 0.6 MPa is required.

Which card sizes and hole diameters does the SF-TLBF support?

Cards must be 20-78 mm wide and 30-105 mm high, with a hole diameter greater than 2.5 mm. Provide actual card samples to confirm suitability.

Does three-head mode produce three separate loop assemblies per cycle?

No. One loop passes through three cards in sequence to form one set. Three-head mode runs at about 11 cycles/min; the card count is not the number of finished loop assemblies.

Enquiry

Provide the required SF-TLBF quantity, card dimensions, hole dimensions, loop samples and lengths, required head configuration, target output, and on-site power and air supply conditions to confirm the setup.

Contact SAGA for a quote