SAGA / PLF-1

PLF-1 PNEUMATIC LABEL FEEDER

Product information

Product overview

The PLF-1 uses one suction cup to present fabric or care labels individually for tabletop pickup before sewing. Removing a label triggers the next pickup. Retest whenever label material or air permeability changes to confirm single-label separation.

The SAGA PLF-1 PNEUMATIC LABEL FEEDER uses compressed air to present fabric labels for tabletop pickup, without an electrical supply. The cylinder moves down to pick up a label, then automatically lifts it. Removing the label changes the vacuum and triggers the next pickup cycle.

A single suction cup works with an adjustable tray to position labels according to their dimensions. Suction is adjusted by regulating air pressure with the supplied valve. The cylinder position can be adjusted forward and backward by 10 mm to align the pickup point. Test new label materials to confirm single-label pickup, taking material and air permeability into account.

Common care labels can be evaluated for use, but material and air permeability must be checked through pickup testing; suitability is not guaranteed for every care label. Cycle time is 0.7 s/cycle, excluding label-removal waiting time. Removing a label triggers the next pickup, so sustained output depends on removal timing and label conditions. Cycle time is not a guaranteed production rate.

Product features

  • Pneumatic operation without electricity.
  • Vacuum changes after label removal automatically trigger the next pickup.
  • Single suction cup with adjustable suction and tray dimensions.
  • Front-back cylinder position adjustment of 10 mm for pickup alignment.
  • Designed to stand directly on a stable tabletop for fabric-label pickup.

Product specifications

Item No.
PLF-1
Voltage / Power Supply
No electricity required
Drive
Pneumatic
Working Air Pressure
0.25-0.5 MPa
Product Weight
Approx. 1 kg
Machine Dimensions
246 x 120 x 308 mm (L x W x H)
Number of Suction Cups
1
Applicable Material
Fabric labels and care labels, subject to pickup testing
Minimum Label Size
29 x 31 mm
Maximum Label Size
107.5 x 50 mm
Cycle Time
0.7 s/cycle, excluding label-removal waiting time
Loading Height
Approx. 10 mm; adjust through testing for label material and air permeability
Pickup Method
Continuous suction from a vacuum generator
Suction Adjustment
Air pressure adjustment using the supplied valve
Cylinder Position Adjustment
Front-back adjustment of 10 mm
Operating Motion
Cylinder lowers to pick up a label, then automatically rises
Cycle Trigger
Vacuum change after label removal triggers the next pickup
Tray Adjustment
Adjust to label length and width
Installation
Place directly on a stable tabletop
Air Supply Lubrication
No lubrication or oil mist required; do not add oil to the air circuit

Application and Operating Procedure

  1. Place the machine on a stable tabletop. Shut off the air supply and release pressure safely before adjusting the tray to the label dimensions and aligning the stack.
  2. Connect the air supply and use the supplied valve to adjust suction within 0.25-0.5 MPa. Test several pickups to check that only one label is lifted each time.
  3. Take the presented label while keeping clear of moving parts, and observe the next cycle. Retest when label material, dimensions or air permeability change.

Selection and use

Check the maximum label size and loading height against the actual material and air permeability. The 10 mm front-back adjustment is not the vertical pickup stroke. Test several pickups after loading to confirm single-label operation.

The machine may move immediately after a label is removed. Keep fingers, clothing and tools clear of moving parts and pinch points. Before refilling, cleaning, adjustment or maintenance, shut off the air supply and release pressure safely. Do not disconnect a pressurized air hose to release pressure. Follow the manual for operation and troubleshooting.

Frequently asked questions

Does the PLF-1 need electricity?

No. It operates on compressed air at 0.25-0.5 MPa.

How does the PLF-1 pick up the next label automatically?

The cylinder lowers to pick up a label and then rises automatically. Removing the label changes the vacuum and triggers the next pickup. Keep clear of moving parts when taking a label.

What label size and stack height does the PLF-1 support?

The minimum label size is 29 x 31 mm and the maximum is 107.5 x 50 mm, with an approximate loading height of 10 mm. Adjust the actual stack height through testing for label material and air permeability.

Can suction and pickup position be adjusted?

Adjust air pressure with the supplied valve to change suction, keeping working pressure within 0.25-0.5 MPa. Adjust the tray to the label dimensions. The cylinder position allows 10 mm of front-back adjustment; shut off the air supply and release pressure safely before repositioning.

What should be done before refilling or cleaning?

Shut off the air supply, release pressure safely and confirm the machine cannot move. Remove debris with a dry soft cloth, and do not add oil to the air circuit.

Does a 0.7 s cycle guarantee a fixed hourly output?

No. The 0.7 s cycle excludes waiting for label removal. Actual output depends on pickup timing and label conditions. For sewing preparation, test the actual pickup workflow and confirm single-label separation.

Enquiry

Provide the required PLF-1 quantity, label dimensions, material and samples, intended stack height and available air supply conditions to confirm pickup suitability.

Contact SAGA for a quote